Wednesday 29 February 2012

Retrofit Site Assessment - The George Dixon Community Centre

As part of our stormwater management workshop in Halifax last week, participants took part in a half day field trip to visit three candidate sites for our upcoming stormwater retrofit project. The field trip was led by Dr. Jiri Marsalek of Environment Canada (Burlington). In this video, Dr. Marsalek discusses the opportunities and limitations to improve stormwater management at the George Dixon Community Centre.

The purpose of our retrofit project will be to reduce the volume, rate and pollutant load of stormwater runoff by increasing infiltration, storage, evapotranspiration, water capture and water reuse on-site. This will be accomplished by implementing a range of Best Management Practices (BMPs). The site will use interpretive panels and signage to educate visitors on the various tools that have been applied. This project will begin in April 2012.

Videos of the other two candidate sites will follow. We'd love to hear which location you think should become Nova Scotia's first stormwater demonstration site.

Wednesday 15 February 2012

Rain Gardens

Rain garden constructed by Clean Annapolis River Project (www.annapolisriver.ca)
Rain gardens are small, landscaped areas that capture, filter and infiltrate rainwater.  Rain gardens can create an attractive detention area where runoff can slowly soak into the ground, be taken up by plants and return to the atmosphere through evapotranspiration. Planted with water-tolerant native plants, rain gardens can become a beautiful and functional feature on your property.

Rain gardens allow at least 30% more water to infiltrate into the ground, compared to a conventional lawn (source). They can help recharge groundwater resources, reduce stormwater volumes and create habitat. Rain gardens are relatively easy and inexpensive to design and build. Just keep in mind a few important considerations when deciding where and how to install a rain garden on your property:

-Observe how stormwater naturally runs in your yard. Place the rain garden at a low point or elsewhere along the natural flow path.

- Maintain at least a 1% slope from the impervious surface to the garden. 

- Rain gardens should be located approximately 3 m away from a building to avoid drainage problems on your property.

-Clay soils don’t allow for proper drainage, therefore look for a place with soil that is sandy, gravelly, loam or a mix. If your soil has a high clay percentage, you can add sand, fine gravel and/or organic matter to improve permeability.

- The surface area of a rain garden should be 20-30% of the roof/parking lot area it drains.

- A general guideline for rain garden depth is 7.5 cm in soils with relatively low infiltration rates (i.e., loam) and up to 15 cm in soils with high infiltration rates (i.e., sandy or gravelly soils).

-  A downspout can empty directly into a rain garden. Just add some stones or a splash pad to prevent erosion.

Rain garden (Photo CMCH: bit.ly/dCOkur)

Some really helpful tips on installing and maintaining rain gardens can be found from the Canadian Mortgage and Housing Corporation's factsheet 'Improving Stormwater Management in Your Yard'.  
More great information on rain gardens, including a list of native, water-loving plants, can be on the Clean Annapolis River Project website

Do you have a photo of a rain garden or maintenance tips that you'd like to share? We'd love to see them! 

Beautiful! (Photo: www.atlantic.sierraclub.ca)